Zippers are designed to be durable, but sometimes, the zippers on your trusty backpack may malfunction or run into issues. And it can be incredibly frustrating to deal with a stuck zipper or a zipper with broken sliders or misaligned teeth.
However, the good news is that many zipper issues can be fixed without completely replacing the zipper or without the need for any professional help. Fixing a zipper can be simpler than you think, so without further ado, let’s explore how to fix a zipper on a backpack.
What are Some Common Zipper Problems?
Before learning how to fix the zippers on a backpack, we need to look into some of the common issues your zippers might run into. Here are some common issues your zipper might face:
Stuck Zipper:
Oftentimes, your zipper might get stuck and will not move because fabric or dirt gets caught in the zipper teeth.
Broken Zipper Slider:
Sometimes, the zipper slider may become loose or misshapen, preventing it from aligning the teeth.
Misaligned Teeth:
Occasionally, the teeth of the zipper might not align properly, causing the zipper to split and not close.
A stuck zipper is one of the most common issues that you might face. Here is how to fix a zipper on your backpack when it gets stuck.
First and foremost, check the zipper of your backpack for any obstructions. Look if any fabric or debris is caught in the zipper teeth.
Step # 2: Use Tweezers or Lubricants
If any fabric or debris is stuck between the zipper teeth, try to remove them with tweezers.
If tweezers don’t work, try applying a small amount of lubricant, such as bar soap, lip balm, or a graphite pencil. Be careful not to get it on the fabric.
Now, use one hand to hold the fabric away from the zipper teeth, and with the other hand, move the slider back and forth until it moves freely.
Another common issue that you might face with a zipper is a broken slider. Here is how to fix a broken zipper on a backpack.
Check if the slider is misshapen or loose.
Use needle nose pliers to gently squeeze the slider back to its original shape.
If reshaping doesn’t work, you might need to replace the slider. Here is how you can replace the slider.
Misaligned teeth can cause the zipper to split. Here is how to fix a zipper on a backpack when the teeth are not aligned.
Check the zipper teeth to identify where they are misaligned. Try to zip them up as much as possible.
Remove the stops at the top of the zipper carefully using pliers, and remove the slider.
Once the slider is removed, manually realign the zipper teeth. Start from the bottom of the zipper and work your way up.
Now that the teeth are aligned, you can slide the zipper slider back.
Reattach the stops using pliers, and make sure they are securely readjusted so the slider remains on track.
Sometimes, replacing a zipper becomes unavoidable; however, for the time being, you might need a quick fix. Here are some temporary solutions for how to easily fix a broken zipper on a backpack.
This simple method requires you to attach a key ring to the zipper pull and hook it over a button, if your backpack has one, to keep the zipper from sliding down.
This trick would also require your backpack to have a button. If your backpack has a button, loop a rubber band through the zipper pull and over the button to keep it in place.
Now there is no button on your backpack, hair spray might come in handy. All you need to do is spray some hairspray on the zipper teeth to create friction and prevent it from sliding.
We know how inconvenient a broken zipper can be when you are on the go and don’t have any tools at your disposal. If you find yourself in such a situation, here are three simple hacks you can use:
If your zipper is stuck and is not moving, try lubricating it with some soap, lip balm, or graphite pencil. Once the zipper is lubricated, gently move the slider until it is free.
If you don’t have anything to lubricate your zipper with, then grip the fabric near the stuck area and gently pull the slider back and forth to free it.
If the pull tab is missing or broken, make a temporary pull by using a paper clip, key ring, or twist tie.
These quick fixes can help you get your zipper back in working order without the need for any special tools.
You must have heard that prevention is better than cure! This applies to your zippers as well. To avoid any future zipper issues and problems from reoccurring, you need to be sure that you are taking care of them. Here is how you can avoid any future zipper issues.
We talked about this earlier; accumulated debris in the zipper can cause jams; hence, it is important to clean the zipper teeth regularly using a small brush or an old toothbrush. Cleaning with a brush will remove any dust or debris from the zippers.
Remember to lubricate your zippers from time to time by applying a small amount of zipper lubricants or a small amount of graphite from your pencil. This will ensure that your zippers move smoothly without getting jammed.
Zip and unzip your backpack gently and avoid yanking the zipper forcefully to prevent damage.
Fixing a zipper on a backpack doesn't have to be tricky. With these simple steps, you can easily fix common zipper problems without replacing the zipper entirely. Remember to take care of your zippers to prevent future issues.
Looking for the perfect backpack for all your needs? Check out the Atlas Wheeled Backpack from Everki. These well-designed bags use durable zippers and metal pulls, so your favorite backpack can stay your favorite.
Explore the collection of wheeled laptop backpacks today and experience the convenience and reliability that only Everki can offer.
Q: How can I fix a zipper without any tools?
A: You can fix some common zipper issues without any tools. For example, if your zipper is stuck, use household items like bar soap or a graphite pencil to lubricate the zipper.
Q: What should I do if my zipper slider is broken?
A: If your zipper slider is broken, you should first try to reshape it using pliers. But if that doesn't work, you’d have to replace the slider.
Q: Can I prevent my zipper from getting stuck?
A: Regular cleaning and lubrication can prevent your zipper from getting stuck.
Q: Is it possible to realign the zipper teeth without completely removing the zipper from the backpack?
A: Yes, you would need to remove the slider, realign the teeth manually, and readjust the slider back on the zipper.
Q: What are some quick fixes for a zipper that keeps sliding down?
A: If your zipper keeps sliding down, you can use a key ring or a rubber band to hold the zipper in place. You can also apply a small amount of hair spray on the zipper to create friction and prevent the zipper from sliding down.